Inombolo kanomyayi
+8618948254481
Sitsalele umnxeba
+86 0752 2621068/+86 0752 2621123/+86 0752 3539308
I-imeyile
gcs@gcsconveyor.com

Ababoneleli be-China abenziwe ngokweSiko abaSebenzisi be-Rubber Idlers kunye nesibiyeli

Inkcazelo emfutshane:

Ababoneleli be-China abenziwe ngokweSiko abaSebenzisi be-Rubber Idlers kunye nesibiyeli

Ukuxhaphaza amavilaluhlobo lokuthwala abavilaphayo, abadla ngokusetyenziswaibhanti lokuhambisa.Inxalenye ephambili ye-idler ye-troughing yi-roller ephakathi ehamba kunye ne-wing rollers emacaleni ayo adityaniswe kwi-angle ye-troughing (umzekelo 45 degrees).
Ngombulelo kwi-angle yokutshiza, izinto ezithwalwayo ziqokelelwa phakathi kwebhanti ukwenzela ukuba izinto eziphathekayo zingawi kwibhanti ngexesha lokuthutha.
Sineentlobo ezininziiirola zokuthutha.Ukuqala iprojekthi yakho entsha,Qhagamshelana namngoku!

 

 

 


  • Uhlobo:Umkhombe we-Idler
  • Iinkcukacha:178 Ububanzi
  • Iinkcukacha zeMveliso

    FAQ

    Ulwazi lweNkampani

    UKUTHENGISWA OKUSHISAYO

    Qhagamshelana ngoku

    Iithegi zeMveliso

    Ubonelelo nge-GCS Conveyor inikeza uluhlu olubanzi lweerola ukuze zilingane uninzi lwezicelo zokuhambisa - ziyilelwe kweyona migangatho iphezulu yoshishino.Izixhobo zomqengqelezi, ubude, iidiameters, kunye neenketho zokuhombisa zinokulungiswa ukuze zihlangabezane neenkcukacha zabathengi.Singabavelisi beerola eziqengqelekayo, iirola, kunye nezakhelo.Umzi-mveliso wethu unokukwenza konke kwiinkampani zezinto ezininzi, okwenza kube lula kumntu wonke ukuyila kunye noku-odola iirola zesiko kunye neefreyimu ezifikelelekayo zokuthelekisa kwi-intanethi.
    IEqual Trough impact idler, iseti yerola yohlobo oluqhelekileyo, iqulathe ii-idlers ezintathu ezilinganayo zobude ezixhasa iirola ezintathu kwisakhelo esinye esimiliselwe kwisakhiwo sokuhambisa.Kwizicelo ze-quarry kunye nemigodi, xa izinto ezinkulu, ezinzima kunye nezibukhali ziwela kumthumeli, zinokuchaphazela kwaye zonakalise ibhanti, ekugqibeleni zikhokelela ekunciphiseni kunye neendleko eziphezulu zokutshintshwa.Ke ngoko, i-impact idler iyadingeka kwindawo yempembelelo yezinto.
    Yenziwe ngendandatho yerabha ukubonelela nge-cushioning kunye nokufunxa impembelelo kwindawo yempembelelo yezinto, ukunciphisa umonakalo kwibhanti.
    Idayamitha eqhelekileyo yetyhubhu yerola yi (mm)D89/102/108/133/152/159 okanye ngokomyalelo
    Ububanzi bebhanti buyafumaneka (mm) 500/650/800/1000/1200/1400/1600/1800 okanye ngokwezifiso

    Iimpembelelo idler isetizingokwesiqhelo ziqelelene ngama-350 mm ukuya kuma-450 mm ukubonelela ngenkxaso iyonke.Ifakwe kwiqela le-roller yokuqala kwisango lokulahla lokuhambisa.

    Usetyenziso
    Iirola zempembelelo zeConveyor zisetyenziselwa abahambisi bebhanti ukufumana imathiriyeli kwaye banciphise kwaye bacothise impembelelo yebhanti yokuhambisa, eyona nto iyilelwe ubume bendawo enomhlwa njengezityalo zokuhlambela amalahle, izityalo zokuphekela, kunye nezityalo zekhemikhali.Iimpembelelo ze-Roller zine-corrosion resistance resistance kwaye ukuba zisetyenziswe kwiimeko ezinobungozi, ubomi babo benkonzo buphindwe kahlanu kune-roller eqhelekileyo.

    Fumana iirola zokuhambisa ezikumgangatho ophezulu,iirola zokuhambisa isiko, ukuxhasa i-roller ehambelanayo, kunye nokunye okufunayo.

     

    Ukuhambisa iiRollerYee-Idlers zeTrough kunye nesibiyeli esinzimaUmhambisi ongenamsebenziIyathengiswa|Iimpawu zeGCS

    Indlela Asebenza Ngayo Amavila

    Amavila ahambayo aquka amavila amathathu nangaphezulu akhokela ibhanti lokuhambisa.Zifunyenwe kwicala elithwele ibhanti kwaye zifakwe kunye nobude bonke bomhambisi.I-idlers ye-troughing isebenzela ukugcina ibhanti kwi-configuration efanayo yonke ubude bayo, nto leyo igcina indawo efanayo ye-cross-sectional njengoko ibhanti ithwala izinto ezigayiweyo ukusuka kwindawo yazo ukuya kwindawo yokulahla.Umntu ongenzi nto ngoonqeni uquka umqulu osembindini, onobubanzi obusisigxina, kunye namaphiko amabini okanye ngaphezulu angenzi nto abekwe kwicala ngalinye lomqulu ophakathi.I-idlers yamaphiko inokuhlengahlengiswa phezulu okanye phantsi ukuze itshintshe i-angle eqinile, echaphazela ubunzulu bomkhombe owenziwe yibhanti yokuhambisa njengoko ihamba.

    IiNzuzo zokuXhobisa abangasebenziyo

    Abangasebenziyo banikezela ngezibonelelo ezimbini ezibalulekileyo.Okokuqala, amavila agcina ibhanti imile ngendlela efanayo kulo lonke uhambo lwalo, nto leyo ephucula ukuzinza kunye nomthamo wokuthwala.Okwesibini, abangasebenziyo banciphisa ubungakanani bezinto ezinokuchitheka ngempazamo kumda weinkqubo yokuhambisa, ephucula imveliso kwaye ikwanyusa ukhuseleko lwabasebenzi, abanokuba semngciphekweni wokuwa xa besebenza kufutshane nezixhobo zokuhambisa.

     

    Trough Idler -SERIES RS/HRS

    Umkhombe we-Idler 14
    Ukuzala kwama-Idlers
    Unyamezelo lwamanani
    Inkqubo Flow
    Ukuzala kwama-Idlers
    Ukuthwala ubungakanani Ngaphandle kweDiametermm

    I-OD yoNyamezelo Class 0

    (unyamezelo oluqhelekileyo)

    6204 47.000 0/-11
    6205 52.000 0/-13
    6305 62.000
    6306 72.000
    6307 80.000
    6308 90.000 0/-15
    6309 100.000
    6310 110.000
    6311 120.000 0/-18
    Unyamezelo lwamanani

     

    Roll OD (mm)

    Ukunyamezela kweDayimitha (mm) Ukutyeba kodonga (mm) Ukunyamezela ukutyeba kodonga (mm)

     

    108

     

    ±0.60

    2.75 ±0.27
    3.0 ±0.30
    3.25 ±0.32
    4.5

    ±0.35

    5.0

     

    114

     

    ±0.60

    2.75 ±0.27
    3.0 ±0.30
    3.25 ±0.32
    5.0

     

     

     

     

    ±0.35

    127

    ±0.80 3.5

     

    133

     

    ±0.80

    3.5
    4.0
    5.0

    139

    ±0.80

    3.75
    4.0

    152

    ±0.90 4.0

    159

    ±0.90 4.5

    165

    ±0.90 5.0

    178

    ±1.0 5.0
    Inkqubo Flow
    Izinto Ezingenayo Ukusika Umatshini Deburring I-Sub-Assy+Ukuwelda INdibano Ukugudisa Ukucoca+Ukwehlisa amafutha Ukupakisha
    a) Uhlobo lweMathiriyeli
    b) Ukutyeba
    c) Imbonakalo
    d) Ubungqukuva
    e) Ukuthe tye
    a) Imbonakalo a) Ubungakanani
    b) Ukuthe tye
    c) Imbonakalo
    a) Ubungakanani (uMthengi) b) Imbonakalo
    c) Ukugxila
    a) Ukukhupha imali a) Ukuxhathisa ukujikeleza
    b) Ukuphela
    d) Ukuxhathisa uthuli
    a) Ukucoca umphezulu a) Imbonakalo a) Umgangatho Njengokupakishwa kweStd

    Idler process flow

     

     

    I-3 ROLL TROUGH IDLERS-178 DIAMETER

    Inombolo yekhowudi. A B 20 ° 30 ° 35 ° 45° Ubungakanani be-engile esisiseko Shaft Dia. Umkhombe Mass RP IMisa iyonke Shaft Dia. Impembelelo Mass RP IMisa iyonke
    C D C D C D C D
    XX-A1-3-D3A2-1200-YY 442 1450 157 1326 229 1263 265 1200 315 1068 90 38 42.0 78.1 38 38.7 83.7
    XX-A1-3-E3A3-1350-YY 494 1650 177 1472 259 1395 293 1336 350 1196 100 38 46.0 91.7 38 42.7 98.7
    XX-A1-3-E3A3-1400-YY 500 1700 177 1492 259 1419 293 1358 350 1214 100 38 46.4 92.9 38 43.3 100.5
    XX-A1-3-E3A3-1500-YY 547 1800 191 1628 289 1541 318 1486 383 1332 100 38 50.0 99.3 38 47.3 107.4
    XX-A1-3-F3A5-1600-YY 567 2000 191 1688 289 1603 338 1526 405 1368 125 38 51.5 111.0 38 48.7 122.3
    XX-A1-3-F3A5-1800-YY 631 2200 226 1888 328 1773 373 1700 439 1544 125 38 56.4 121.1 38 54.3 133.8
    XX-A1-3-G3A5-2000-YY 706 2400 247 2082 364 1975 409 1904 488 1730 140 38 62.2 148.3 42 60.5 167.1
    XX-A1-3-G3A5-2200-YY 785 2600 276 2310 405 2193 463 2098 552 1918 140 42 68.2 165.3 42 67.1 186.0

    Qaphela:XX-igalelo: RS okanye HRS.
    YY-Inputforangle: 20° , 30° , 35° ,45°
    Ubungakanani be-engile yesiseko botyunjiweyo bumgangatho oqhelekileyo wesitokhwe.Imilinganiselo E kunye no-F iyahluka ngokutshintsha kobungakanani be-engile yesiseko njengoko kudweliswe ngezantsi.
    Amanani ekhowudi abonisiwe ngawevila, kuba abavilaphi batshintsha zombini" A'sH kumanani ekhowudi ukuya " B's

    ICade No Nom
    A
      20 ° 30 ° 35 ° 45° Isiseko
    Iengile
    Shaft Dia. Umkhombe
    Ubuninzi RP
    IMisa iyonke Umphini
    Dia
    Impembelelo Mass RP IMisa iyonke
    B C D c D C D C D Ubungakanani  
    XX-A1-3-F3A5-1600-YY 569 2000 191 1688 289 1603 338 1526 405 1368 125 48 57.8

    127.9

    48 / /
    XX-A1-3-F3A5-1800-YY 633 2200 226 1866 328 1773 373 1700 439 1544 125 48 62.7 139.0 48 / /
    XX-A1-3-G3A5-2000-YY 708 2400 247 2082 364 1975 409 1904 488 1730 140 48 68.4

    167.4

    48 / /
    XX-A1-3-G3A5-2200-YY 787 2600 276 2310 405 2193 463 2098 552 1918 140 48 74.4

    181.9

    48 / /
    XX-A1-3-G3A5-2400-YY 848 2800 293 2488 438 2351 492 2268 596 2060 140 48 79.1

    193.9

    48 / /
    XX-A1-3-G3A5-2500-YY 873 2900 303 2552 438 2437 513 2326 613 2122 140 50 81

    201.8

    50 / /
    XX-A1-3-G3A5-2600-YY 905 3000 321 2648 462 2523 526 2416 636 2198 140 50 83.4

    208.1

    50 / /
    XX-A1-3-G3A5-2800-YY 984 3200 347 2876 495 2731 569 2624 690 2392 140 50 89.5

    222.7

    50 / /
    XX-A1-3-G3A5-3000-YY 1050 3400 368 3064 527 2915 606 2802 740 2544 140 50 94.5

    235.7

    50 / /
    co        
    Qaphela:XX-inputfor:RSorHRS        
    YY-Inputforangle:20°,30°,35°,45°        
    Ubungakanani be-engile yesiseko obutyunjiweyo busemgangathweni oqhelekileyo wesitokhwe.Imilinganiselo E kunye no-F ayihlukanga ngotshintsho kwisayizi ye-engile yesiseko njengoko kudweliswe ngezantsi.        
    Amanani ekhowudi ebonisiweyo ngaweevila, kuba abavilaphi batshintsha zombini "A" kumanani ekhowudi ukuya ku"B".        

     

    Abavelisi bekhonkco lokuthumela i-GCSunelungelo lokutshintsha imilinganiselo kunye nedatha ebalulekileyo nangaliphi na ixesha ngaphandle kwesaziso.Abathengi mabaqinisekise ukuba bafumana imizobo eqinisekisiweyo evela kwi-GCS phambi kokuba bagqibezele iinkcukacha zoyilo.


  • Ngaphambili:
  • Okulandelayo:

  • 1.Uyenza njani i-roller yokuhambisa?

    Ukwenza iirola kubandakanya ezi nkqubo zilandelayo:

    Umbhobho processing line, Welding-assembly-ukuhlolwa umgca for rollers, Ukuthwala isihlalo, isitampu indibano umgca, Ukuthwala isihlalo processing line, Ukutshiza ipeyinti-zomisa line.Nceda ubhekisele kwinqakuUzenza njani iirola zokuhambisa?ngeenkcukacha zenkqubo.

    2.Ndizikhetha njani iirola zokuhambisa?

    Xa sikhetha ii-rollers, sinokukhetha i-roller yobukhulu obuhlukeneyo kunye nezinto eziphathekayo ngokweemeko ezahlukeneyo kunye neentlobo zezixhobo.Ulwazi oluninzi nceda ubhekiselele kuNdingayikhetha njani i-roller conveyor?

    3.Zenziwe ngantoni iirola zebhanti zokuhambisa?

    I-Conveyor belt rollers yenziwe ngentsimbi, i-HDPE kunye nezinye izinto ezininzi.

     

     

     

     

     

     

    Ulwazi lweNkampani ye-GCS

    Isiqinisekiso se-GCS

    Kutheni ukhetha i-GCS

    Inkqubo yemveliso ye-GCS

    Ukutyelela uMthengi we-GCS

    Iinkonzo ze-GCS

     

     

     

     

    https://www.gcsconveyor.com/conveyor-idlers-and-drums-from-gcs-on-our-product-range/

     

     

     

     

     

     

     

     

     

    https://www.gcsconveyor.com/contact/

     

     

     

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi