Factory made hot-sale Industrial Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS
Factory made hot-sale Industrial Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS Detail:
FLAT CARRY|RETURN IDLERS
As part of our (GCS )GLOBAL CONVEYOR SUPPLIES a wide range of idler assemblies to suit most conveyor applications – engineered according to the highest industry standards.
(GCS )GLOBAL CONVEYOR SUPPLIES Flat Return Idler Assemblies are available in 1 or 2 roll configurations, with the 1-roll design being more prevalent. The mass of the return belt is the only load that return idlers are required to support. Idler frame can be customized to suit required belt width. The spacing of these is greater than that of the trough/carry rollers but must be sufficient enough to prevent conveyor belt flap. This distance is usually between 2 and 6 meters.
The return idler are used as support for the return side of belt. Used where materials are not sticky, corrosive, or abrasive.
SPECIFICATION:
For Belt Width: 400-2800 mm
Surface Treatment: Electrostatic Powder Coating, Galvanization.
APPLICATION :Mining|Steel mill|Cement plant|Power plant|Chemical|
Plant|Sea Port|Storage etc.
CERTIFICATE: ISO 9001: 2015,
Flat Return Idler -SERIES LS/RS
FLAT CARRY AND RETURN IDLER-102 DIAMETER
| Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
| XX-A1-1-K0E2-0350-YY | 442 | 600 | 27 | 3.8 | 8.4 |
| XX-A1-1-K0E2-0400-YY | 492 | 650 | 27 | 4.2 | 9.1 |
| XX-A1-1-K0E2-0450-YY | 542 | 700 | 27 | 4.6 | 9.7 |
| XX-A1-1-K0E2-0500-YY | 592 | 750 | 27 | 4.9 | 10.2 |
| XX-A1-1-K0E2-0600-YY | 692 | 850 | 27 | 5.7 | 11.4 |
| XX-A1-1-K0E2-0650-YY | 742 | 900 | 27 | 6.1 | 12.0 |
| XX-A1-1-K0E2-0750-YY | 842 | 1000 | 27 | 6.8 | 13.2 |
| XX-A1-1-K0E2-0800-YY | 892 | 1050 | 27 | 7.2 | 13.9 |
| XX-A1-1-K0E2-0900-YY | 992 | 1150 | 27 | 7.9 | 15.0 |
| XX-A1-1-K0E2-1000-YY | 1092 | 1250 | 27 | 8.6 | 16.1 |
| XX-A1-1-K0E2-1050-YY | 1142 | 1300 | 27 | 9.0 | 16.8 |
| XX-A1-1-K0E2-1200-YY | 1292 | 1450 | 27 | 10.1 | 18.5 |
XX-input for: LS or RS.
For flat carry idlers replace E with H.
For alter native return drop heights refer ide ntificati on system.
FLAT CARRY AND RETURN IDLER-114 DIAMETER
| Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
| XX-A1-1-K0E2-0500-YY | 593 | 750 | 27 | 5.5 | 10.8 |
| XX-A1-1-K0E2-0600-YY | 693 | 850 | 27 | 6.3 | 12.0 |
| XX-A1-1-K0E2-0650-YY | 743 | 900 | 27 | 6.7 | 12.6 |
| XX-A1-1-K0E2-0750-YY | 843 | 1000 | 27 | 7.6 | 14.0 |
| XX-A1-1-K0E2-0800-YY | 893 | 1050 | 27 | 8.0 | 14.7 |
| XX-A1-1-K0E2-0900-YY | 993 | 1150 | 27 | 8.8 | 15.9 |
| XX-A1-1-K0E2-1000-YY | 1093 | 1250 | 27 | 9.6 | 17.1 |
| XX-A1-1-K0E2-1050-YY | 1143 | 1300 | 30 | 10.0 | 19.0 |
| XX-A1-1-K0E2-1200-YY | 1293 | 1450 | 30 | 11.3 | 21.1 |
XX-input for: LS or RS.
For flat carry idlers replace E with H.
For alter native return drop heights refer ide ntificati on system.
FLAT CARRY AND RETURN IDLER-127 DIAMETER
| Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
| XX-A1-1-K0E2-0500-YY | 594 | 750 | 27 | 6.2 | 11.5 |
| XX-A1-1-K0E2-0600-YY | 694 | 850 | 27 | 7.1 | 12.8 |
| XX-A1-1-K0E2-0650-YY | 744 | 900 | 27 | 7.6 | 13.5 |
| XX-A1-1-K0E2-0750-YY | 844 | 1000 | 27 | 8.5 | 14.9 |
| XX-A1-1-K0E2-0800-YY | 894 | 1050 | 27 | 9.0 | 15.7 |
| XX-A1-1-K0E2-0900-YY | 994 | 1150 | 27 | 9.9 | 17.0 |
| XX-A1-1-K0E2-1000-YY | 1094 | 1250 | 27 | 10.8 | 18.3 |
| XX-A1-1-K0E2-1050-YY | 1144 | 1300 | 30 | 11.3 | 20.3 |
| XX-A1-1-K0E2-1200-YY | 1294 | 1450 | 30 | 12.6 | 22.4 |
| XX-A1-1-K0E3-1350-YY | 1494 | 1650 | 33 | 14.5 | 27.2 |
| XX-A1-1-K0E3-1400-YY | 1544 | 1700 | 33 | 15.0 | 28.0 |
| XX-A1-1-K0E3-1500-YY | 1644 | 1800 | 36 | 15.9 | 31.8 |
| XX-A1-1-K0E5-1600-YY | 1844 | 2000 | 36 | 17.8 | 35.3 |
XX-input for: RS or HRS.
For flat carry idlers replace E with H.
For alter native retur n drop heights refer identification system.
FLAT CARRY AND RETURN IDLER-127 DIAMETER
| Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
| XX-A1-1-K0E2-1000-YY | 1096 | 1250 | 33 | 11.3 | 21.3 |
| XX-A1-1-K0E2-1050-YY | 1146 | 1300 | 33 | 11.8 | 22.3 |
| XX-A1-1-K0E2-1200-YY | 1296 | 1450 | 33 | 13.2 | 24.7 |
| XX-A1-1-K0E3-1350-YY | 1496 | 1650 | 36 | 15.0 | 29.8 |
| XX-A1-1-K0E3-1400-YY | 1546 | 1700 | 36 | 15.4 | 30.6 |
| XX-A1-1-K0E3-1500-YY | 1646 | 1800 | 36 | 16.5 | 32.5 |
| XX-A1-1-K0E5-1600-YY | 1848 | 2000 | 38 | 18.5 | 37.8 |
| XX-A1-1-K0E5-1800-YY | 2046 | 2200 | 40 | 20.5 | 45.8 |
XX-input for: RS or HRS.
For flat carry idlers replace E with H.
For alter native retur n drop heights refer identification system.
GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Conveying Rollers Of Trough Rubber Idlers And Bracket
Return Idler Bracket for Conveyor Accessories
Steel Garland Rollers 6roll by GCS
Product detail pictures:
Related Product Guide:
We stay with the basic principle of "quality initially, services first, steady improvement and innovation to fulfill the customers" for your management and "zero defect, zero complaints" as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Factory made hot-sale Industrial Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS , The product will supply to all over the world, such as: Netherlands, Curacao, Hamburg, If any product meed your demand, remember to feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality merchandise, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Marguerite from Maldives - 2017.08.18 18:38
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Harriet from Angola - 2018.09.08 17:09
