GCS Conveyor Solution New Metal Conveyor Rollers

Short Description:

Return rollers can be divide into single rollers type and two roller type. There are diffirent function in conveyor rollers.

If a single roller is used, it is usually called a flat return idler which spreads over the whole width of the belt and can be attached to the conveyor support structure. When two rollers would be used, it is called a V return idler.The return idlers can also be covered with rubbered disks which should be removing sticky materials from the belt.

Any question, welcome to contact us. Let’s begin a new project!

Type: Flat Return Idler

Specifications: 152 Diameter

Send email to us

Product Detail

FAG

Company Info

HOT SALE

Contact now

Product Tags

FLAT CARRY|RETURN IDLERS

As part of our (GCS )GLOBAL CONVEYOR SUPPLIES a wide range of idler assemblies to suit most conveyor applications – engineered according to the highest industry standards.

(GCS )GLOBAL CONVEYOR SUPPLIES Flat Return Idler Assemblies are available in 1 or 2-roll configurations, with the 1-roll design being more prevalent. The mass of the return belt is the only load that return idlers are required to support. The Idler frame can be customized to suit the required belt width. The spacing of these is greater than that of the trough/carry rollers but must be sufficient enough to prevent the conveyor belt flap. This distance is usually between 2 and 6 meters.

The return idler is used as support for the return side of the belt. Used where materials are not sticky, corrosive, or abrasive.

SPECIFICATION:

For Belt Width: 400-2800mm

Surface Treatment: Electrostatic Powder Coating, Galvanization.

CERTIFICATE: ISO9001:2015,

CONVEYOR BRAND: GCS

Flat Return Idler -SERIES RS/HRS

FLAT CARRY AND RETURN IDLER-152 DIAMETER

Code No.	A	B	Series 20			Series 30
Code No.	A	B	Shaft Dia.	Mass R.P.	Total Mass	Shaft Dia.	Mass R.P.	Total Mass
XX-A1-1-K0E2-0750-YY	849	1000	27	13.8	20.3	N/A	N/A	N/A
XX-A1-1-K0E2-0800-YY	899	1050	27	14.5	21.2	N/A	N/A	N/A
XX-A1-1-K0E2-0900-YY	999	1150	27	16.0	23.1	N/A	N/A	N/A
XX-A1-1-K0E2-1000-YY	1099	1250	27	17.5	25.0	33	17.7	27.8
XX-A1-1-K0E2-1050-YY	1149	1300	30	18.4	27.4	33	18.4	28.9
XX-A1-1-K0E2-1200-YY	1299	1450	30	20.4	30.2	33	20.6	32.1
XX-A1-1-K0E3-1350-YY	1499	1650	33	23.4	36.1	36	23.6	38.4
XX-A1 K0E3-1400-YY	1549	1700	33	24.2	37.2	36	24.3	39.5
XX-A1-1-K0E3-1500-YY	1649	1800	36	25.6	41.5	36	25.9	41.9
XX-A1-1-K0E5-1600-YY	1849	2000	36	28.7	46.2	38	29.0	48.3
XX-A1-1-K0E5-1800-YY		2200	N/A	N/A	N/A	40	32.2	57.5

FLAT CARRY AND RETURN IDLER-152 DIAMETER

Code No.	A	B	Series 45			Series 55
Code No.	A	B	Shaft Dia.	Mass R.P.	Total Mass	Shaft Dia.	Mass R.P.	Total Mass
XX-A1-1-K0E2-0900-YY	1002	1150	38	16.7	30.7	N/A	N/A	N/A
XX-A1-1-K0E2-1000-Y Y	1102	1250	38	18.2	31.1	48	20.1	41.0
XX-A1-1-K0E2-1050-YY	1152	1300	38	19.0	34.3	48	20.8	42.4
XX-A1-1-K0E2-1200-YY	1302	1450	38	21.2	37.9	48	23.0	46.8
XX-A1-1-K0E3-1350-YY	1502	1650	42	24.2	45.7	48	25.9	52.5
XX-A1-1-K0E3-1400-YY	1552	1700	42	25.1	47.2	48	26.6	53.9
XX-A1-1-K0E3-1500-YY	1652	1800	42	26.6	49.8	48	28.1	56.9
XX-A1-1-K0E5-1600-YY	1852	2000	45	29.9	58.3	48	31.0	62.6
XX-A1-1-K0E5-1800-YY	2052	2200	45	33.2	64.1	48	33.9	68.3

XX-input for: RS or HRS.
For flat carry idlers replace E with H.
For alter native return drop heights refer ide ntificati on system.

What are roller bracket used for?

Roller Conveyor Manufacturing and Supply by (GCS)Global Conveyor Supplies

What is roller conveyor？

Previous: Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS

Next: Flat Return Idler – GCS Conveyor Roller Provider

1.How do I choose conveyor rollers?

When choosing rollers, we can choose rollers of different sizes and materials according to different scenarios and types of materials. More information refer to How do I choose a roller conveyor?