Mobile Phone
+8618948254481
Call Us
+86 0752 2621068/+86 0752 2621123/+86 0752 3539308
E-mail
gcs@gcsconveyor.com

Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS

Short Description:

When carrying the belt back to the feeder, it also needs support. However, since the belt does not carry any load, the support does not have to be as robust. Therefore, return idlers can be positioned at two or three times the distance of the carrying rollers. Even the number of srollers per idler can be reduced to one or two rollers.

If a single roller is used, it is usually called a flat return idler which spreads over the whole width of the belt and can be attached to the conveyor support structure.

When two rollers would be used, it is called a V return idler.The return idlers can also be covered with rubbered disks which should be removing sticky materials from the belt.


  • Type: Flat Return Idler
  • Specifications: 102 Diameter,114Diameter,127 Diameter
  • Product Detail

    Company Info

    HOT SALE

    Product Tags

    FLAT CARRY|RETURN IDLERS

    As part of our (GCS )GLOBAL CONVEYOR SUPPLIES a wide range of idler assemblies to suit most conveyor applications – engineered according to the highest industry standards.
    (GCS )GLOBAL CONVEYOR SUPPLIES Flat Return Idler Assemblies are available in 1 or 2 roll configurations, with the 1-roll design being more prevalent. The mass of the return belt is the only load that return idlers are required to support. Idler frame can be customized to suit required belt width. The spacing of these is greater than that of the trough/carry rollers but must be sufficient enough to prevent conveyor belt flap. This distance is usually between 2 and 6 meters.
    The return idler are used as support for the return side of belt. Used where materials are not sticky, corrosive, or abrasive.

    SPECIFICATION:

    For Belt Width: 400-2800 mm
    Surface Treatment: Electrostatic Powder Coating, Galvanization.
    APPLICATION :Mining|Steel mill|Cement plant|Power plant|Chemical|
    Plant|Sea Port|Storage etc.
    CERTIFICATE: ISO 9001: 2015,

    Flat Return Idler -SERIES LS/RS

    Flat Return Idler 17

    FLAT CARRY AND RETURN IDLER-102 DIAMETER

    Code No. A B Shaft Dia. Mass R.P. Total Mass
    XX-A1-1-K0E2-0350-YY 442 600 27 3.8 8.4
    XX-A1-1-K0E2-0400-YY 492 650 27 4.2 9.1
    XX-A1-1-K0E2-0450-YY 542 700 27 4.6 9.7
    XX-A1-1-K0E2-0500-YY 592 750 27 4.9 10.2
    XX-A1-1-K0E2-0600-YY 692 850 27 5.7 11.4
    XX-A1-1-K0E2-0650-YY 742 900 27 6.1 12.0
    XX-A1-1-K0E2-0750-YY 842 1000 27 6.8 13.2
    XX-A1-1-K0E2-0800-YY 892 1050 27 7.2 13.9
    XX-A1-1-K0E2-0900-YY 992 1150 27 7.9 15.0
    XX-A1-1-K0E2-1000-YY 1092 1250 27 8.6 16.1
    XX-A1-1-K0E2-1050-YY 1142 1300 27 9.0 16.8
    XX-A1-1-K0E2-1200-YY 1292 1450 27 10.1 18.5

    XX-input for: LS or RS.
    For flat carry idlers replace E with H.
    For alter native return drop heights refer ide ntificati on system.

    FLAT CARRY AND RETURN IDLER-114 DIAMETER

    Code No. A B Shaft Dia. Mass R.P. Total Mass
    XX-A1-1-K0E2-0500-YY 593 750 27 5.5 10.8
    XX-A1-1-K0E2-0600-YY 693 850 27 6.3 12.0
    XX-A1-1-K0E2-0650-YY 743 900 27 6.7 12.6
    XX-A1-1-K0E2-0750-YY 843 1000 27 7.6 14.0
    XX-A1-1-K0E2-0800-YY 893 1050 27 8.0 14.7
    XX-A1-1-K0E2-0900-YY 993 1150 27 8.8 15.9
    XX-A1-1-K0E2-1000-YY 1093 1250 27 9.6 17.1
    XX-A1-1-K0E2-1050-YY 1143 1300 30 10.0 19.0
    XX-A1-1-K0E2-1200-YY 1293 1450 30 11.3 21.1

    XX-input for: LS or RS.
    For flat carry idlers replace E with H.
    For alter native return drop heights refer ide ntificati on system.

    FLAT CARRY AND RETURN IDLER-127 DIAMETER

    Code No. A B Shaft Dia. Mass R.P. Total Mass
    XX-A1-1-K0E2-0500-YY 594 750 27 6.2 11.5
    XX-A1-1-K0E2-0600-YY 694 850 27 7.1 12.8
    XX-A1-1-K0E2-0650-YY 744 900 27 7.6 13.5
    XX-A1-1-K0E2-0750-YY 844 1000 27 8.5 14.9
    XX-A1-1-K0E2-0800-YY 894 1050 27 9.0 15.7
    XX-A1-1-K0E2-0900-YY 994 1150 27 9.9 17.0
    XX-A1-1-K0E2-1000-YY 1094 1250 27 10.8 18.3
    XX-A1-1-K0E2-1050-YY 1144 1300 30 11.3 20.3
    XX-A1-1-K0E2-1200-YY 1294 1450 30 12.6 22.4
    XX-A1-1-K0E3-1350-YY 1494 1650 33 14.5 27.2
    XX-A1-1-K0E3-1400-YY 1544 1700 33 15.0 28.0
    XX-A1-1-K0E3-1500-YY 1644 1800 36 15.9 31.8
    XX-A1-1-K0E5-1600-YY 1844 2000 36 17.8 35.3

    XX-input for: RS or HRS.
    For flat carry idlers replace E with H.
    For alter native retur n drop heights refer identification system.

    FLAT CARRY AND RETURN IDLER-127 DIAMETER

     

    Code No. A B Shaft Dia. Mass R.P. Total Mass
    XX-A1-1-K0E2-1000-YY 1096 1250 33 11.3 21.3
    XX-A1-1-K0E2-1050-YY 1146 1300 33 11.8 22.3
    XX-A1-1-K0E2-1200-YY 1296 1450 33 13.2 24.7
    XX-A1-1-K0E3-1350-YY 1496 1650 36 15.0 29.8
    XX-A1-1-K0E3-1400-YY 1546 1700 36 15.4 30.6
    XX-A1-1-K0E3-1500-YY 1646 1800 36 16.5 32.5
    XX-A1-1-K0E5-1600-YY 1848 2000 38 18.5 37.8
    XX-A1-1-K0E5-1800-YY 2046 2200 40 20.5 45.8

    XX-input for: RS or HRS.
    For flat carry idlers replace E with H.
    For alter native retur n drop heights refer identification system.

    GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.


  • Previous:
  • Next:

  • GCS Company Information

    GCS certification

    Why choose GCS

    GCS production process

    GCS Customer visiting

    GCS Services

     

     

     

     

     

    3

     

     

     

     

     

  • Write your message here and send it to us